NEW JN0-363 CRAM MATERIALS | JN0-363 FREE VCE DUMPS

New JN0-363 Cram Materials | JN0-363 Free Vce Dumps

New JN0-363 Cram Materials | JN0-363 Free Vce Dumps

Blog Article

Tags: New JN0-363 Cram Materials, JN0-363 Free Vce Dumps, Online JN0-363 Training Materials, JN0-363 Reliable Dumps Ppt, JN0-363 New Braindumps Questions

What's more, part of that VCETorrent JN0-363 dumps now are free: https://drive.google.com/open?id=1s2GDiOvGk2ssNrtUcpAqXsWWvYTY4l5X

Because industry of information technology is fast-moving. To excel in this advanced industry, pass the JN0-363 exam of the Juniper JN0-363 certification. Hundreds of applicants have faced issues in updated dumps material to crack the Juniper JN0-363 examination in one go.

The JN0-363 exam covers a wide range of topics, including network architecture, routing protocols, MPLS, BGP, OSPF, and VPN technologies. Candidates are expected to have a strong foundation in these areas and be able to apply their knowledge to real-world scenarios. JN0-363 exam is designed to test the candidate's ability to deploy, configure, and troubleshoot Juniper Networks routers and switches in a service provider environment.

The JN0-363 Exam is designed to measure a candidate's understanding of service provider network architecture, protocols, and services. JN0-363 exam covers a wide range of topics, including routing protocols, MPLS, BGP, multicast, and Layer 2 VPNs. Candidates will be tested on their ability to configure and troubleshoot these protocols on Juniper Networks service provider routers and switches.

>> New JN0-363 Cram Materials <<

JN0-363 Free Vce Dumps - Online JN0-363 Training Materials

We will be happy to assist you with any questions regarding our products. Our JN0-363 practice exam VCETorrent helps to prepare applicants to practice time management, problem-solving, and all other tasks on the standardized JN0-363 Exam and lets them check their scores. The JN0-363 results help students to evaluate their performance and determine their readiness without difficulty.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q71-Q76):

NEW QUESTION # 71
Click the Exhibit.

Referring to the configuration shown in the exhibit, which statement is true?

  • A. Traffic destined to address 192.168.5.1 will take next-hop 172.16.1.2.
  • B. Traffic destined to address 192.168.5.1 will take next-hop 172.16.1.3.
  • C. Traffic destined to address 192.168.5.1 will alternate between next-hops 172.16.1.2 and 172.16.1.3
  • D. Traffic destined to address 192.168.5.1 will take next-hop 10.0.1.1.

Answer: B


NEW QUESTION # 72
Click the Exhibit.



Referring to the exhibit, which route(s) will be exported to neighbor 192.168.1.2?

  • A. 10.0.0.0/24, 11.0.0.0/24,100.0.0.1/32, 100.0.20.1/32, and 192.168.1.1/32
  • B. 100.0.20.1/32, 192.168.1.1/32, and 100.0.0.1/32
  • C. 100.0.1/32 and 100.0.20.1/32
  • D. 100.0.20.1/32

Answer: A


NEW QUESTION # 73
An OSPF router does not have a router ID configured.
In this scenario, which statement is correct about the router ID?

  • A. A router ID will not be assigned until it is manually configured.
  • B. The Junos OS will use the IP address assigned to the Interface with the highest priority.
  • C. The Junos OS will use the IP address assigned to the loopback interface for the router ID.
  • D. The Junos OS will use the IP address assigned to the interface with the lowest MAC address.

Answer: C

Explanation:
The router identifier is used by BGP and OSPF to identify the routing device from which a packet originated.
The router identifier usually is the IP address of the local routing device. If you do not configure a router identifier, the IP address of the first interface to come online is used. This is usually the loopback interface.
Otherwise, the first hardware interface with an IP address is used
In OSPF, if a router ID is not manually configured, Junos OS will automatically select the router ID based on the highest IP address of any of the router's loopback interfaces. If no loopback interface exists, the highest IP address of any active interface will be used. Therefore, answer C is correct.
References:
Juniper Networks documentation on OSPF: OSPF Overview


NEW QUESTION # 74
Click the Exhibit button.

Referring to the exhibit, from which device(s) does R3 learn about Route X?

  • A. R1 only
  • B. R2 only
  • C. both R2 and R1
  • D. directly from the router in AS 64502

Answer: B

Explanation:
R2 can not forward IBGP learned routes to another IBGP neighbor correct R3 will learn about Route X from R2 only. R1 is in a separate AS and Route X is advertised to R2 through eBGP. R2 will then advertise the route to R3 using iBGP. R3 cannot learn routes directly from another AS without having a direct eBGP session with that AS.References:
BGP Route Propagation and Selection, Juniper Networks Documentation
Understanding iBGP and eBGP Route Distribution, Juniper Networks Documentation


NEW QUESTION # 75
Exhibit

Referring to the exhibit, which two additional steps should you lake to fully configure NSR? (Choose two.)

  • A. You must configure graceful restart.
  • B. You must configure GRES.
  • C. You should configure the max period for NSR precision timers.
  • D. You should configure commit synchronization.

Answer: B,D

Explanation:
https://www.juniper.net/documentation/us/en/software/junos/high-availability/topics/task/nsr-configuring.html Nonstop routing (NSR) requires both Graceful Routing Engine Switchover (GRES) and commit synchronization to be configured to maintain routing protocol and forwarding state during a Routing Engine switchover. NSR allows the secondary Routing Engine to take over the control plane without the protocols needing to restart, and GRES ensures that the forwarding plane continues operating with the current forwarding table. Commit synchronization ensures that configuration changes are synchronized between the primary and backup Routing Engines.
Reference:
Juniper Networks documentation on High Availability: Configuring Nonstop Active Routing


NEW QUESTION # 76
......

We can assist you with learning by simplified information by our JN0-363 learning guide. At the same time, our specialists will update JN0-363 learning materials daily and continue to improve the materials. Therefore, you can use our JN0-363 exam questions faster and more efficiently, which means that you can save a lot of time to do more meaningful and valuable things. When you are learning our JN0-363 Learning Materials, you can find confidence in the process of learning materials and feel happy in learning. After about 20-30 hours, you can get your Juniper certificate.

JN0-363 Free Vce Dumps: https://www.vcetorrent.com/JN0-363-valid-vce-torrent.html

BTW, DOWNLOAD part of VCETorrent JN0-363 dumps from Cloud Storage: https://drive.google.com/open?id=1s2GDiOvGk2ssNrtUcpAqXsWWvYTY4l5X

Report this page